The tarball sb-se-1.1.tgz will update a Strongbolt RaQ system
to include the NuOnce standard enhancements brings the Strongbolt install
close to NuOnce Networks 4.6 CBQ install.
==========================================================================
If you previously installe sb-se-1.0 you may need to install this rpm
  libc-client-2002e-14.i386.rpm
Just do;
  wget http://fsn.raqware.com/Strongbolt/RPMS/libc-client-2002e-14.i386.rpm
  then rpm -ivh libc-client-2002e-14.i386.rpm
and if you need/want pine
  wget http://fsn.raqware.com/Strongbolt/RPMS/pine-4.63-1.i386.rpm 
  then rpm -ivh pine-4.63-1.i386.rpm
These rpms are included in the tarball sb-se-1.1.tgz
==========================================================================
sb-se-1.1 Installs the following rpms;
libc-client-2002e-14.i386.rpm                     
nuonce-mindterm-1.0-1.noarch.rpm
nuonce-mysql-locale-en-1.0.0-1.centos4.noarch.rpm
nuonce-mysql-locale-ja-1.0.0-1.centos4.noarch.rpm
nuonce-mysql-am-1.0.0-1.i386.rpm                  
nuonce-mysql-ui-1.0.0-1.centos4.noarch.rpm
nuonce-mysql-capstone-1.0.0-1.centos4.noarch.rpm  
nuonce-yumconf-1-0.noarch.rpm
nuonce-mysql-glue-1.0.0-1.centos4.noarch.rpm
pine-4.63-1.i386.rpm

sb-se-1.1 Installs the following pkgs;
BQ-5102R-AuthExternal-2.1.pkg
BQ-5102R-HostFix-1.0.pkg
BQ-5102R-YUM-GUI-2.0.3-1.pkg
BQ-5102R-CMU-2.53.pkg
** Note Front Page is optional: you will be pronpted (y/n)
BQ-FrontPage-2002-1.pkg

Remote Access Tab  an SSH client in the admin GUI
MySQL server
MySQL GUI under Server Management -> Network Services
YUM Updater under BlueLinQ
Front Page 2002 extensions; see  under Site Management -> Add Site
perl-suidperl required by OWM and others
 
It will also update the /etc/yum.repos.d directory
 
We accept no reponsibility for the use or misuse of this install.
We ran test on new Strongbolt installs and all seems to work OK!
We have installed on a production server, all worked OK.

I suggest you backup before install on a production server.
We do not use frontpage, so feedback from problems with fp will be addressed.
If you have problems post to the lists cobalt and/or BlueQuartz,
and we may help and/or update the tarball.

 login to a shell session as admin
 execute: su -
 enter root password when prompted.
 this will put you in /root
   if not execute cd /root
 execute: wget http://fsn.raqware.com/Strongbolt/sb-se-1.1.tgz
 execute: tar -xzpsvf sb-se-1.1.tgz
 execute: cd SB-SE
 execute: ./sb-se-install.sh
 execute: cd ../
 execute: rm -rf SB-SE (remove the SB-SE directory)
 execute: yum -y update
 yum -y update will take a considerable time to finish as there are 200+ updates.
 When yum -y update completes, if logged into the admin GUI, 
 logout and backin again to refresh.